www.oilgastechnology.com
19
'26
Written on Modified on
Thixotropic Cement System for Severe Lost Circulation
Halliburton introduces the SentinelCem Shield cement system, pumped ahead of primary cementing to seal severe and total loss zones and reach planned cement tops.
www.halliburton.com

Lost circulation during primary cementing occurs when cement slurry flows into fractures or highly permeable formations instead of filling the annulus between casing and borehole. The consequence is a cement top below plan, incomplete zonal isolation and often costly remedial cementing. Halliburton has introduced the SentinelCem Shield cement system to address severe to total losses in this phase of well construction.
Limits of Conventional Lost-Circulation Materials
Standard lost-circulation materials can plug small pores and fractures, but their effectiveness drops when loss paths are larger. In such conditions, particulate materials cannot bridge the openings, and the main cement job continues to lose volume to the formation.
How the Thixotropic System Works
SentinelCem Shield is pumped ahead of the main cement job to seal loss zones. The system is thixotropic: it remains pumpable while under shear and rapidly develops gel strength when shear decreases or stops. Once the slurry enters the loss zone and its flow slows, it builds structure and seals the openings. If shear resumes, the material returns to a flowable state. This behaviour allows the subsequent cement to be placed up to the planned top of cement, supporting long-term well integrity.
"SentinelCem Shield closes an important gap in severe-loss mitigation," said Daniel Casale, vice president, Cementing, Halliburton.
Field Results in the Middle East
Halliburton developed the system for a customer in the Middle East where conventional lost-circulation solutions had not cured losses or achieved the required top of cement. The first field trial took place in April 2026, and the product team reports success in 10 of 10 jobs. In the Middle East application, cement circulated to surface, a result rarely achieved in that field, which avoided a possible remedial cement job. An associated case study estimates savings of about USD 1 million on one well.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original product announcement.
Lost circulation is commonly classified by severity, from seepage losses through partial losses to severe and total losses, where little or no returns reach surface. Remedial options in severe cases include reactive pills, cross-linked polymers and thixotropic or rapid-setting cement systems, chosen according to loss rate, temperature and formation type. Achieving the planned top of cement matters for zonal isolation and for regulatory well-integrity requirements, and remedial squeeze cementing adds rig time and cost.
Edited by Evgeny Churilov, Induportals Media - Adapted by AI.
www.halliburton.com

